Specs
Sensor Pack specs
Setup notes and briefing figures for Sensor Pack.
What Sensor Pack specs look like in a working week
The Sensor Pack specs page records the technical detail behind sensor placement and system reading performance. It helps the team check signal conditions, mounting positions and integration with the rest of the plant.
Start with the sensing task, the exact mounting point and the line speed expected at that station. Heat from ovens, washdown water, sugar dust, metal fines and vibration all change how a Sensor Pack should be specified for a South African plant. These notes are used to pin down detection distance, housing protection and cable routing before parts are sent to site.
Photograph the machine area and the intended bracket position before any hardware is fitted. The specs record should note supply voltage, output type, connector style and the clearance around the beam or sensing face. That page becomes the reference when maintenance checks a nuisance trip, missed count or drifting reading after shift handover.
Detection range and mounting detail
This page should state what the sensor is meant to pick up, from cartons and bottles to steel parts or pallet edges. Include the target size, colour or surface where that affects performance, then add the bracket height and angle used on the line. A usable spec is one a fitter can read at the panel and match to what is physically installed.
Link Sensor Pack specs to the matching line record and any fault history before ordering replacements. Confirm connector orientation, cable length and contamination exposure against the site photos, then send the brief through the contact form with the pack name left exactly as used on the plant file. Add one image that shows the sensor view and another that shows the mounting area.
- Detection distance matched to the target
- Mounting height recorded from machine datum
- Related: Systems, Plant plays, and Floor notes
- Site brief sent with photos and faults
South African site conditions in spec sheets
Specs for Gauteng lines often need allowance for dust build-up inside packing halls, while coastal plants may need better sealing against moisture and salt air. Older factories in places such as Crown Mines or Springfield can also limit bracket positions because guards, frames and cable trays were added over time. Record what cannot move, what is electrically available and what the sensor must ignore during production.
Power interruptions matter because some sensors restart differently from others and not every PLC input card reports the same fault state. Frequent washdown changes the choice of housing, gland and mounting hardware. If forklifts pass close to the station, the spec should note physical protection as clearly as the sensing setup.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Figures to include on the Sensor Pack page
Send the Sensor Pack brief with site photos, timing, and what has already failed. Note the mounting point, contamination risk and what the line is meant to detect.
| Path | sensor-pack |
|---|---|
| Hub | specs |
| Mailbox | Contact form |
Capture the supply details, output configuration, sensing range and environmental rating on the same sheet. Add the line name, asset location and the failure symptom that triggered the check so the record is useful later. When procurement or maintenance revisits the pack, the page should show what was installed and why those settings were chosen.
What our Industrial Plant customers say
Verified Google reviews