Specs
Coastal Pack specs
Site prep notes and key spec figures for Coastal Pack.
What Coastal Pack specs cover for site planning
Coastal Pack Specs sets out the details for floors that must handle salt air, moisture and regular wash-down conditions. This page covers the specification points that matter once a coastal site moves from general planning to exact floor requirements.
For Coastal Pack, start with wash-down frequency, salt exposure and the traffic mix between pallet jacks, trolleys and foot movement. Durban and Cape Town coastal sites often need closer attention to moisture carry-in, drain positions and corrosion risk around joints, edges and fixings. Spec planning here is less about broad layout and more about exact conditions that affect coating build, slip resistance and cleaning cycles.
Record the slab condition before any prep begins, including joints, spalls and places where water lingers after cleaning. A site file for Coastal Pack specs should also note air movement, nearby doors and whether brine, acids or food residue reach the surface during normal shifts. Those observations usually settle questions about primer selection, curing limits and where extra protection is needed.
Coastal exposure points
This page sets out the specification items that matter once the area has been confirmed for Coastal Pack. Expect details on moisture tolerance, chemical contact, surface profile, falls to drains and the finish required for regular wash-down work. The aim is to define conditions clearly enough for site prep, application checks and handover records.
Match Coastal Pack specs to the area layout, then check drain positions, thresholds and wall upstands before finalising the schedule. Use the contact form to send the path name, site town and one clear image of the wettest section if the existing surface shows staining, blistering or breakdown. Include any hygiene or export requirement that affects the finish or cleaning cycle.
- Moisture limits and substrate condition
- Falls, drains and wash-down direction
- Related: Systems, Plant plays, and Floor notes
- Chemical and salt-air exposure record
Coastal plant checks
Sites near the coast need closer attention to humidity, chloride exposure and the way wind-driven moisture enters through docks and service doors. In Durban and Cape Town, that often affects cure windows, cleaning patterns and the protection needed at perimeters, columns and joints. Older slabs in working plants can also hold contamination below the surface, so prep notes should cover oil, previous coatings and repairs.
Regular wash-downs change more than appearance. They influence slip requirements, cove details, drain interfaces and the spec for areas where trolleys, pallet jacks or bins turn while wet. During load-shedding, ventilation and cure conditions can shift, so inspection times and application stages should be noted with the actual plant routine in mind.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Spec file essentials
Best suited to coastal sites where floor conditions, traffic and washdowns differ from inland plants.
| Path | coastal-pack |
|---|---|
| Hub | specs |
| Mailbox | Contact form |
File Coastal Pack specs with the project record while the prep method, product build and area measurements are still current. Add the cleaning regime, operating temperature range and any exclusion zones around lines or packing equipment. That creates a usable reference for maintenance planning, QA checks and future repair sections.
What our Industrial Plant customers say
Verified Google reviews